Omron E5AK PROGRAMMABLE TYPE User Manual page 133

Wait width
• Specifies the wait width (deviation on SP) during a wait.
• When this parameter is set to "0", wait is disabled.
Function
Setting Range
Setting
F Related description
4.5 Wait Operation (page 4-16)
See
Alarm during ramp step enable
• To enable alarms during the ramp step, set to [ON]. To disable alarm, set to [OFF].
Function
"
Setting
Run all enable
• To successively execute the program of all patterns from pattern 0, set to [ON].
• Patterns whose "pattern execution count" parameter (level 1 mode) is set to "0"
are skipped.
Function
"
0 to 9999
Setting Range
" : / " "
Setting Range
" : / " "
Expansion Mode
Unit Default
EU
Default
Default
0
5--43