Omron E5AK PROGRAMMABLE TYPE User Manual page 123

_C/_F selection
• This parameter can be used when thermocouple or platinum resistance thermom-
eter is selected as the input type.
• Set the temperature input unit to either of "_C" or "_F".
Function
"
Setting
F Related description
3.2 Setting Input Specifications (page 3-4)
F Related parameter
See
"Input type" (setup mode)
Parameter initialize
• Returns parameter settings to their factory settings. However, note that the fol-
lowing parameters are not affected by execution of this parameter:
"Input type", "Scaling upper limit", "Scaling lower limit", "Decimal point" and
Function
"_C/_F selection"
• When this parameter is selected, [
eters, press the
Example
of use
Setting Range
": _C / " ": _F
key to specify [
Conditions of Use
The input type must be set to tempera-
ture input (thermocouple or platinum
resistance thermometer).
Default
] ("no") is first displayed. To initialize param-
] ("yes").
Setup Mode
5--33