Multiplexer Component Diagnostics; Component Diagnostic Command - Paradyne COMSPHERE 6800 Series Multiplexer Management And Configuration Manual

Multiplexer Component Diagnostics

Multiplexer component diagnostics consist of tests and status reports for multiplexer components.
Table 1-14 lists the commands available for these tests. The table contains the command
abbreviation, a brief description of what the command does, what results are displayed, and
whether the executed command disrupts NMS operation.
Command
Compare Control
Processors
Control Processor
Test
Power and Alarm
Control Test
TSI Module Test
For detailed information on these commands, refer to the COMSPHERE 6800 Series Network
Management System Multiplexer Command Reference Manual.
6800-A2-GB21-10
Table 1-14

Component Diagnostic Command

Name Disruptive
ccp No
cpt Yes
pact No
tsimt Yes
August 1994
Description
Compares the contents of
the active CPUs
nonvolatile memory with
that of the redundant
CPUs; or copies the
contents of a node's active
CPU database to the
redundant CPU.
Runs a series of hardware
diagnostic tests on a
specified CPU.
Runs a series of diagnostic
tests on a specified node's
power and alarm control
modules.
Runs a hardware
diagnostic test on a 745's
TSI module.
Managing Multiplexers
Results
Test results are expressed
as pass or fail, or
aborted.
Test results are expressed
as pass or fail, or
aborted. If the test fails an
error message displays
indicating the failure.
Test results are specified
as pass, fail, or aborted.
If a test fails an error
message displays
indicating the failure.
Test results are specified
as pass/fail. If the test fails
an error message indicates
the failure.
1-87