Objectives and Reader Assumptions
This manual provides the information needed to enable a user to configure and manage the
following multiplexers for use in the COMSPHERE
(NMS):
How to Use this Manual
Chapter 1. Managing Multiplexers provides an overview of the products and features supported
and the information necessary to manage a multiplexer network with the 6800 Series NMS.
Chapter 2. Configuring Multiplexers discusses the procedures for configuring multiplexer
networks managed by the 6800 Series NMS.
Documentation Conventions
The following conventions are used throughout this document.
Typeface
This typeface indicates a choice of options that can be entered. The 6800 Series NMS commands
are always shown in italics within parentheses. For example, the Change Node Configuration
Parameters command is shown as (chncp).
6800-A2-GB21-10
Preface
r
ACCULINK
731/740/741/742 multiplexers
ACCULINK 745 multiplexers
ACCULINK 764 multiplexers
r
DATAPHONE
II 719/72x NETWORKER
DATAPHONE II 724/735 multiplexers
August 1994
r
6800 Series Network Management System
v