COMSPHERE 6800 Series Nework Management System
Obtaining Node Information
The MRT allows you to get information for the current node or the destination node entries within
its routing table.
To obtain information regarding a node in the Node Selection List, perform the following steps:
1. Click on the desired node identifier in the Node Selection List. The node identifier is
2. Click on Node Info from the Misc pull-down menu.
To obtain information specific to the link entries for a given destination node in a routing table,
perform the following steps:
1. Point the cursor at the list of links for the desired destination node.
2. Click on Entry Info from the Misc pull-down menu.
1-60
highlighted in inverse video.
The Node Information window appears (see Figure 1-9).
Figure 1-9. Node Information Window
The list is highlighted.
The Entry Information window appears (see Figure 1-10).
August 1994
6800-A2-GB21-10