Entry Information Window; Quitting The Mrt Utility - Paradyne COMSPHERE 6800 Series Multiplexer Management And Configuration Manual

Quitting the MRT Utility

To exit the MRT Utility, perform the following:
6800-A2-GB21-10
Figure 1-10. Entry Information Window
Click on Quit from the Table pull-down menu.
If you have not saved any modified routing tables, a dialog window appears asking if you
want to quit without saving the tables. Do one of the following:
a. Click on the No button if you wish to save the routing tables.
The dialog box closes. Refer to the section Saving a Routing Table to save the tables.
b. Click on the Yes button if you do not want to save the routing tables.
The Manage Routing Table window closes.
August 1994
Managing Multiplexers
1-61