Defining A Profile For A Channel Port - Paradyne COMSPHERE 6800 Series Multiplexer Management And Configuration Manual

Defining a Profile for a Channel Port

1. From the Configuration menu,
2. A maximum of eight channel profiles can be defined for use on the NETWORKER. These
3. To return to the Channel Parameters menu, at the enter profile number > prompt,
4. TYPE: 1
5. TYPE: the number of one of the unassigned profiles
6800-A2-GB21-10
Do not use the terminal or PC profile number for any other
profile definition or you will lock yourself out of the system.
TYPE: 1
PRESS: Enter
The Channel Parameters menu appears.
profiles are numbered 1 to 8. To determine which profiles have been assigned to specific
channel ports,
TYPE: 2
PRESS: Enter
The Channel Profiles screen appears showing the channel port numbers (0–13) and the
profiles (1–8) currently assigned to them.
For example, if Channel 9 has already been assigned Profile 3, while Channel 6 has been
assigned Profile 2, then no channels have been assigned for Profiles 4, 5, 6, 7, or 8. Select a
profile number that has not been used.
TYPE: E
PRESS: Enter
The system returns to the Configuration menu.
TYPE: 1
PRESS: Enter
The Channel Parameters menu appears.
PRESS: Enter
The system displays the following prompt:
Node (101) enter profile number >
PRESS: Enter
August 1994
CAUTION
Configuring Multiplexers
2-31