2. Click on Trim by Link Count.
3. Click on the Number of Links per Entry text area.
4. TYPE: the maximum number of links per destination node.
5. Click on the OK button.
To trim a routing table by hop count, perform the following steps:
1. Select Trim Entries from the Edit pull-down menu.
2. Click on Trim by Hop Count.
3. Click on the Number of Hops text area.
4. TYPE: the maximum number of hops per destination node.
5. Click on the OK button.
6800-A2-GB21-10
Figure 1-7. Trimming Options Window
A box appears around Trim by Link Count confirming that selection.
The I-bar appears in the text area.
The routing table is trimmed to the specified maximum. The
each modified link list.
The Trimming Options window appears (see Figure 1-7).
A box appears around Trim by Hop Count confirming that selection.
The I-bar appears in the text area.
The routing table is trimmed to the specified maximum. The
each modified link list.
August 1994
Managing Multiplexers
column contains an "*" for
column contains an "*" for
1-57