Defining A Channel Group For A Terminal Or Pc (External Systems Port) - Paradyne COMSPHERE 6800 Series Multiplexer Management And Configuration Manual

Defining a Channel Group for a Terminal or PC (External Systems Port)

From the Configuration Menu,
1. TYPE: 7
2. Choose an unassigned Channel Group Number between 1 and 63.
3. To return to the Configuration menu,
4. TYPE: 4
5. TYPE: The channel group number you want defined
6. TYPE: 1
7. To select Group Members parameter,
8. To add the Channel Group Number to the Local Group Definition parameters menu,
6800-A2-GB21-10
PRESS: Enter
The Group Definition Summary screen appears.
PRESS: Enter
PRESS: Enter
The system displays the following prompt:
(Node xxx) enter dial sequence >
PRESS: Enter
The Group Type menu appears.
PRESS: Enter
The Local Group Definition parameters menu appears. The parameters on your screen
should match those shown below.
PARAMETER
1) Group Members
2) Security Password
3) Call Queuing
4) Dial Restriction
5) Incoming Restriction
D) Delete
S) Save
TYPE: 1
PRESS: Enter
TYPE: 1
PRESS: Enter
August 1994
SETTING
None
Inactive
Inactive
None
None
Configuring Multiplexers
2-35