Line Tabs - Extron electronics DMP 128 Plus User Manual

Line Tabs

The Line tabs allows user to register and configure the audio and dialling of the lines. There are three secondary
tabs: Registration,
Registration
Figure 62. VoIP Line Registration Tab
To register a SIP account:
1. In the User Name field (see figure 62,
through the call server.
NOTE: User Name is referred to as Line Extension by some call servers.
2. In the Authentication User Name field (
the same as the user name entered in step 1.
3. In the Authentication Password field (
NOTE: If a password is not required by the call server, leave this field blank.
4. In the Display Name field (
5. In the Primary Proxy Name/IP field, enter the call server IP address or domain name.
6. In the Primary Proxy Port field (
NOTE: If no port number is specified by the user, 5060 is used by default.
7. Click Apply (
7
changes does not initiate line registration with the call server.
8. Click Register (
next to the Register button.
NOTES:
•
To unregister a line from the call server, click Unregister (
•
To clear data from a field, delete the data from the field and click Apply (
•
If registration is unsuccessful, refer to the logs page (see
VoIP system administrator.
Audio
on page 82, and
1
), enter a display name for the line (optional).
4
), enter the SIP traffic port number.
6
) to make the changes to the DMP 128 Plus (click Clear to clear all fields). Applying the
) to initiate registration with the call server. Registration is confirmed in the Status field
8
Dialing
on page 82.
), enter the user name currently assigned to the DMP 128 Plus
), enter a name for the line (optional). In some cases, this will be
2
), enter the call server registration password.
3
).
9
).
7
Logs Tab
on page 83) and contact the
DMP 128 Plus • Internal Web Page 81