Menu Bar; File; Edit; View - Extron electronics DMP 128 Plus User Manual

Menu Bar

File

The File menu offers the standard Windows File Menu options such as New, Open, Save, Save As, Recent
Files, and Exit, along with three operations that are specific to Extron devices. Those operations are:
• Export Single Device — Saves the currently selected device in Device Manager as a configuration file. This
function is used to save an individual device when there are multiple devices listed in the Device Manager
(see Device Manager
• Backup — Recalls and transfers all partial presets of a DMP 128 Plus to the configuration file or template file
within DSP Configurator.
NOTES:
•
Configuration files have an .EDC file extension and template files have an .EDCT file extension.
•
The file operation, File, is only available in Emulate mode (see
TIP: It is best to create and save configuration files while in Emulate mode.
•
Convert Device to... — Select a model of DMP 128 Plus to which the current configuration file will be
converted. After a conversion target model is selected, the Device Conversion dialog opens.

Edit

The Edit menu offers the standard Windows Edit Menu options such as Cut, Copy, and Paste.

View

• Meter Bridge — Opens a meter bridge to view input and output activity. The
meter bridge is a floating window, allowing use of the DSP Configurator
workspace while simultaneously monitoring input and output activity.
NOTE: The meter bridge is only available in Live mode with a TCP/IP
connection.
• Re-enable All Dialogs — This option re-enables all dialog boxes that no
longer appear based on user selection (certain dialog boxes that appear are
user-defeatable by selecting a checkbox that reads Do Not Show This
Dialog Again).
•
Group Controls — Opens the Group Controls dialog box to access existing group controls and add new
groups.
•
AT Meters — Opens a dialog box to select AT devices on the network. Double-click a device to open a meter
bridge dialog box that displays AT transmit (Tx) and receive (Rx) channel levels for that device. The dialog
box is a floating window, allowing use of the main workspace while simultaneously monitoring AT levels.
•
Show All Channels — Individual channels can be hidden by user selection. This provides options for the
user to select which input and output groups are visible in the main workspace.
on page 15).
Live and Emulate Panel
Figure 17.
DMP 128 Plus • DSP Configurator Software
on page 16).
View Menu
14