Extron electronics DMP 128 Plus User Manual page 60

Command
Audio Group Master Commands (continued)
View group type
View group members
X5%
KEY:
= Target OID:
X6#
= Group master group number:
X6&
= Group type:
Unsolicited Meter Groups
NOTE:
See the DSP Configurator Help File for more information on groups.
Set unsolicited
meter response rate
View unsolicited meter
response rate
Set unsolicited meter group
View unsolicited meter group
NOTES:
•
If the device is using firmware
•
If the device is using firmware v.11.0000-b006 or higher, the commands above
View OID members in meter
group
Enable meters in meter group
Disable meters in meter group
X6*
KEY:
= Unsolicited meter rate (response per second):
X6(
= Unsolicited meter group setting:
X9*
= Meter group number:
Unsolicited Meter Group Response
Unsolicited meter group
values
NOTES:
•
Values in the response can be
•
The order of the values is the numerical order of the OIDs/members in that group.
X6#
KEY:
= Group master meter group number:
ASCII command
(host to device)
E X6# }
P GRPM
E X6# }
O GRPM
Object ID (OID) Number Tables
See
1 64
through
6
= Gain
E X6* }
R GRPU
E }
RGRPU
Verbose Mode 2/3
E X6( }
G GRPU
E }
GGRPU
Verbose Mode 2/3
before v1.11.0000-b006, the commands above are global.
E X9* }
O GRPM
E X9* }
D *1GRPM
E X9* }
D *0GRPM
0 1500 0.0 -150.0
to ( to
1
through
Response
(device to host)
X6# X6&]
GrpmP *
X6# X5% X5%
GrpmO * * *...*
1 2
on page 58.
12 21
= Mute = Meter
X6*]
GrpuR
X6*]
X6*]
GrpuR
X6(]
GrpuG
X6(]
X6(]
GrpuG
are session-based.
X9*
GrpmO *<OID>
1
]
*<OID> ...*<OID>
2 n
X9* ]
GrpmD *1
X9* ]
GrpmD *0
1 10 1
- ; default is (for firmware before v1.11.0000-b006)
1 25 1
- ; default is (for firmware v1.11.0000-b006 or higher)
0
disables unsolicited meter responses,
group for unsolicited meter value responses;
1 64
through
X6#
GrpmV *<val> *<val>
1
]
<val>
n
dBFS).
64
DMP 128 Plus • SIS Configuration and Control
Additional description
X5% ] X5%
n is the control address.
In verbose modes 0 and 1,
the response is simplified
X5% X5%
to * *...*
1 2
This returns the group
number, followed by the list
of OIDs.
1 64
- specifies/enables a meter
0
at power on.
Verbose modes 1/3 only.
*...*
2
X5% ]
n
53