Extron electronics DMP 128 Plus User Manual page 86

NAT Traversal
The NAT Traversal tab allows user to set the NAT traversal method.
Figure 60. VoIP Network NAT Traversal Tab
To disable NAT traversal, select Disabled from the NAT Traversal drop-down list (see figure 60,
Click Apply ( ) to save and apply changes.
8
NOTES:
•
The default is disabled.
• When the Apply button is clicked, network services on the DMP 128 Plus restart. This process can take
up to 30 seconds.
To set the STUN Server as the NAT traversal method:
1. From the NAT Traversal drop-down list (
2. In the STUN Server Address field (
3. In the STUN Port field (
4. Click Apply ( ) to save and apply changes.
8
To set the TURN Server as the NAT traversal method:
1. From the NAT Traversal drop-down list (
2. In the TURN Server Address field (
3. In the TURN Port field (
4. If required, enter the username for the TURN server in the TURN Username field (
5. If required, enter the password for the TURN server in the TURN Password field (
6. Click Apply ( ) to save and apply changes.
8
To set STUN/TURN (ICE) as the NAT traversal method:
1. From the NAT Traversal drop-down list (
2. In the STUN Port field (
3. In the TURN Port field (
4. Click Apply ( ) to save and apply changes.
8
ICE then automatically determines the appropriate method for traversal.
), select STUN Server.
1
), enter the IP address or domain name of the STUN server.
2
), enter the port number of the STUN server.
3
), select TURN Server.
1
), enter the IP address or domain name of the TURN server.
4
), enter the port number of the TURN server.
5
), select STUN/TURN (ICE).
1
), enter the port number of the STUN server.
3
), enter the port number of the TURN server.
5
).
6
).
7
DMP 128 Plus • Internal Web Page
).
1
79