Connect to a DMP 128 Plus in Live Mode
1. Click the Live button in the menu bar of the DSP Configurator.
Alternatively, select Tools > Connect to Device or press <F6> on the keyboard.
The Connect to device... dialog box opens (see figure 22).
2. Connect to the DMP 128 Plus.
To connect via TCP/IP (
•
Click the TCP/IP tab in the dialog box. Enter the IP address of the device in the Hostname or IP
Address field. If necessary, enter the device password in the Password field.
•
Enter the port number in the Port field, if available. When port is not specified, DSP Configurator will
attempt to connect to secure ports first.
To connect via USB (
•
Click the USB tab in the dialog box.
•
Select the device from the USB Devices drop-down list.
To connect via RS-232 (
•
Click the RS-232 tab in the dialog box.
•
Select the Com port the device is connected to on the host PC from the Com Port drop-down list.
Figure 22.
Connect to device...TCP/IP, USB, and RS-232
):
A
):
B
):
C
DMP 128 Plus • DSP Configurator Software
17