Window; Help; Run Macros Drop-Down; Presets Drop-Down List - Extron electronics DMP 128 Plus User Manual

Window

The Window menu offers the standard Windows Window Menu options such as Cascade and Close All Windows.

Help

The Help menu offers the standard Windows Help Menu options such as Content, Search, and About.

Run Macros Drop-Down

The Run Macro drop-down list is available when connected to the DMP 128 Plus in Live
mode to view and run any macros that have been pushed to the device (see figure 19).
The drop-down list is unavailable in Emulate mode.
The list of macros updates dynamically when a new macro is created. Macros created in
DSP Configurator that have not been pushed to the device appear in the list with an
asterisk to the right of the macro name. Only macros that have been pushed to the
device can be run from the Run Macro drop-down list.

Presets Drop-Down List

Select the Presets drop-down list to view and apply presets saved in the current
configuration file or on a device connected in Live mode (see figure 20). Presets with
an asterisk next to them are on the DMP 128 Plus, but not in the current configuration
file. Run a preset to load it into the configuration file.
Alternatively, perform a backup to run all presets and load them into the current
configuration file (see
After selecting a preset from the list, choose one of the following actions from the DSP Configurator status panel:
•
Recall — Recalls the selected preset and applies settings to the main workspace.
• Cancel — Cancels the preset recall and returns to the main workspace with the current emulation or state
intact.
• Delete — Deletes the selected preset from the configuration.

DSP Configurator Status Panel

This Menu Bar panel displays the current status of DSP Configurator and shows when data is being pushed to or
pulled from the device. When the software is ready to perform actions, the panel displays Ready.

Live and Emulate Panel

The Live and Emulate buttons allow users to switch between Live
and Emulate mode and displays transmit (Tx) and receive (Rx)
activity when in Live mode (see figure 21).
Live Mode
Enter Live mode to connect to a DMP 128 Plus and push or pull configurations between the device and host PC.
In Live mode, changes made in DSP Configurator are directly applied to the device. Additionally, presets and
macros can be created and stored on the device.
When entering Live mode, the user is prompted with the Connect to device dialog box.
File on page 14).
Figure 21. Live and Emulate Buttons
DMP 128 Plus • DSP Configurator Software
Figure 19. Macros
Figure 20. Presets
16