Network Tab - Extron electronics DMP 128 Plus User Manual

• Call Status — Displays a green "off hook" (active) or a red "on hook" (inactive) icon depending on the call
status of that line.
• Packets Rx — Displays the total number of packets received on the line for the current call.
•
Packets Dropped — Displays the total number of packets dropped on that line for the current call.
• Jitter Rx — Displays the current inbound network jitter value for that line in the current call (highest network
jitter value if multiple appearances of jitter).
• Duration — Displays the duration of the current call in hh:mm:ss format.
Details
The Details panel displays the details of each appearance within the line currently selected in the VoIP Status
panel including the current codec in use, call duration, packets received, packets dropped, and inbound jitter (see
figure 55, on page 74).
2

Network Tab

The Network tab has four secondary tabs for VoIP network configuration:
• Interface •
NOTE: For more information regarding VoIP network configuration, refer to the DMP 128 Plus product page at
www.extron.com.
Interface
The Interface tab allows user to set the VoIP interface (see figure 56).
Figure 56. Interface Tab
To set the VoIP interface:
1. From the VoIP Interface drop-down list (
traffic. Options are LAN 1, LAN 2, and VLAN.
NOTE: Only select VLAN when joining a tagged network port on the switch.
•
QoS/LLDP-MED Transport
•
NAT Traversal
) select the desired LAN/VoIP port to be used for VoIP network
1
•
Advanced
DMP 128 Plus • Internal Web Page 75