Tools - Extron electronics DMP 128 Plus User Manual

Tools

• Presets — Opens a submenu to mark and clear elements in the main
workspace as well as an option to save marked elements to a preset
• Mark All Items — Selects all gain blocks, processor blocks, and mix-
points in the main workspace. Performing this function before saving a
preset ensures every element in the workspace is saved to the preset.
• Save Preset — Saves the marked blocks and mix points of the current
configuration as a preset.
NOTE: When Save Preset is clicked, if items are marked only the
elements marked with a green outline are saved to the preset.
•
Clear Marked Items — Unmarks all currently marked elements.
• Configure Groups — Opens the Configure Groups dialog box to create,
edit, and delete Gain, Mute, and Meter groups.
• Configure Digital I/O — Opens the Configure Digital I/O dialog box to
assign actions and modes to the digital inputs and outputs.
•
Configure Players — Opens the Configure Players dialog box to upload
audio files and assign them to players. Player control options are also found
in the dialog box.
• Configure ACP Panels — Opens the Configure ACPs dialog box to
configure Extron Audio Control Panel interfaces.
•
Configure Macros — Opens the Configure Macros dialog box for creating,
editing, and deleting macro functions.
•
Configure USB Audio — Opens the Configure USB Control dialog with Windows communication volume
and mute controls and Windows playback volume and mute controls to affect levels and mute status in the
connected Extron USB audio processor.
•
Configure Internal Triggers — Opens the Internal Trigger Setup dialog with the configuration, testing,
and application of internal triggers.
•
Connect/Disconnect from Device — In
Device dialog box. In Live mode, Disconnect from Device is listed and returns the software to Emulate
mode.
•
Device Manager — Opens the
•
Issue RESET Command — Clears the device of all processors and other configuration settings. This command
does not reset general settings such as IP address.
•
Firmware Loader — Opens the
download the software.
•
Organize Building Blocks — Opens the
•
Device Settings — Opens the
Dante device, and other settings.
•
Options — Opens the
defaults, and so on.
•
Network Audio Control — Opens the Dante Controller application by Audinate for routing audio over a Dante
network.
• Expansion Bus — Contains a submenu to assign a DMP 128 Plus as a Primary or Secondary unit.
•
Phone Dialer — Configure and test the DMP 128 Plus VoIP line. DSP Configurator must be connected Live
to a DMP 128 Plus V-model in order for the Phone Dialer dialog to be opened.
Emulate mode, Connect to Device is listed and opens the Connect to
Device Manager dialog box .
Firmware Loader application, if it is installed. Go to
Organize Building Blocks dialog box.
Device Settings dialog box to edit date and time, IP address, DHCP status,
Options dialog box to configure DSP Configurator appearance, default settings, DSP value
Figure 18.
DMP 128 Plus • DSP Configurator Software
Tools Menu
www.extron.com
to
15