Finding A Dante Device Ip Address; Physical Dante Network Setup - Extron electronics DMP 128 Plus User Manual

5. Enter the new name (up to 31 characters) using any combination of letters, numbers, and special characters
except for @, =, and . (period).
6. Press <Enter> on the keyboard to confirm the name, or click another channel text box.
7. Repeat steps 4 through 6 to rename additional receiver or transmitter channels.
8. When finished renaming receivers and transmitter, close the Device View dialog box.

Finding a Dante Device IP Address

To find the IP address of a Dante device, the name of the device is needed (see
AT in Dante Controller
NOTE: If the DMP 128 Plus AT has not been renamed, its default name consists of the product name followed
by a hyphen, plus the last 6 digits of the device MAC address (for example, DMP128P-0ee8ee).
Figure 32. Device Info Page
1. Open Dante Controller.
2. On the Dante Controller-Network View screen, click the Device Info tab (see figure 32,
3. On the Device Info page, locate the name of the DMP 128 Plus in the Device Name column (
address is located in the Primary Address column (
is 192.168.11.120.

Physical Dante Network Setup

A physical network is required to share Dante audio channels between Dante-enabled devices like the DMP 128
Plus AT. Other Dante-enabled devices must be on the same physical network in order to communicate via Dante.
There are two types of network topology that can be used to create a physical Dante network.
•
Star network topology has one DMP 128 Plus AT as the central unit which is directly connected to up to 3
other units. A larger network switch can be used in place of a central DMP 128 Plus AT, allowing more than
four total units to be connected in the star topology.
3 3 4 4
DMP 128 Plus C AT DMP 128 Plus C AT
7 7 8 8
+V +V +S +S -S G -S G
Figure 33. Star Network Topology
on page 21).
3 3 4 4
DMP 128 Plus C AT DMP 128 Plus C AT
7 7 8 8
+V +V +S +S
DMP 128 Plus C AT #1
1 (SFC) 2 3 (PRI) 4
USB AUDIO
RS-232 RESET
Tx Rx G LAN
DMP 128 Plus C AT #4
3 3 4 4
DMP 128 Plus C AT DMP 128 Plus C AT
7 7 8 8
+V +V +S +S
Star Network Topology
). The IP address for the connected DMP 128 Plus AT
3
DMP 128 Plus C AT #2
1 (SFC) 2 3 (PRI) 4
RS-232 USB AUDIO
RESET
-S G -S G
Tx Rx G LAN
3 3 4 4
DMP 128 Plus C AT DMP 128 Plus C AT
7 7 8 8
1 (SFC) 2 3 (PRI) 4
USB AUDIO
RS-232 RESET
-S G -S G Tx Rx G LAN
Renaming the DMP 128 Plus
DMP 128 Plus C AT #3
1 (SFC) 2 3 (PRI) 4
USB AUDIO
RS-232 RESET
+V +V +S +S -S G -S G Tx Rx G LAN
DMP 128 Plus • Dante Controller
).
1
). The IP
2
24