Dmp 128 Plus Voip Web Page; Home Tab - Extron electronics DMP 128 Plus User Manual

DMP 128 Plus VoIP Web Page

The DMP 128 Plus VoIP web page consists of the following tabs for configuration (see figure 54):
Figure 54. VoIP Web Page Tabs
Home
— Displays VoIP statuses and details.
1
Network —Allows network configuration for the interface, QoS/LLDP-MED, transport, and NAT traversal.
2
Line — Allows the user to register a SIP account, add or remove codecs from selected lines, and configure
3
dialing options. Eight line tabs are available.
Logs
— Displays a running log of SIP transaction relating to all lines on the device.
4
System — Allows user to export VoIP configurations to a JSON file.
5

Home Tab

The Home tab displays high-level information about the DMP 128 Plus VoIP configuration. There are two main
panels: VoIP Status and
Figure 55. Home Page
VoIP Status
The VoIP Status panel (
• Line — Displays the VoIP line number.
•
Registration — Displays the current registration status of that line. Registered lines indicate whether the
primary or secondary server is used.
• Audio DSP — Displays whether the line is assigned to an Aux channel in the DMP 128 Plus (Configured) or
the line is not assigned to an Aux channel (Not Configured) (see the DSP Configurator Help File for details
on assigning Aux inputs).
Details (see figure 55).
) displays the status of the following parameters for each line:
1
DMP 128 Plus • Internal Web Page 74