Dmp 128 Plus Default Web Page; Communication Settings - Extron electronics DMP 128 Plus User Manual

DMP 128 Plus Default Web Page

The DMP 128 Plus default internal web page provides an overall, read-only view of the device status, with some
editable fields.
Panels are:

Communication Settings

1
RS-232 Settings
2
Figure 42. DMP 128 Plus Default Web Page
The internal web page does not automatically update. To see an updated page, click the Refresh button on the
web browser.
Communication Settings
The Communication Settings panel displays the TCP/IP communication settings (see figure 43). Click EDIT
( ) to open the Communication Settings dialog box (see figure 44) and edit the TCP/IP settings. The following
1
can be edited: DHCP status, IP address, subnet mask, and default gateway.
NOTE: If the Use DHCP checkbox is checked (enabled), the IP address, subnet mask, and default gateway
cannot be edited.
Figure 43. Comm Settings Panel
Device Info
3
Passwords
4
Figure 44. Comm Settings
Date/Time Settings
5
DMP 128 Plus • Internal Web Page 71