Extron electronics DMP 128 Plus User Manual page 45

X3( Varies according to the output mode
=
Mutes
Input number for monitoring.
X3^
If
Group Mutes
Group member for mute monitoring.
X3^
If
Macros
Macro number.
X3^
If
Presets
Preset number.
X3^
If
Automix Gate Status
Input number for automix gate monitoring.
X3^
If
Signal Presence
Input number for signal presence monitoring.
X3^
If
Preset Number — 1 through 32
X4)
=
X4! Input Number — 1 through 20 (inputs 13-20 are Aux inputs)
=
X4@ Virtual Return Number — 1 through 16
=
X4# EXP Input Number — 1 through 16 (1 through 48 on DMP 128 Plus AT models)
=
X4$ Output Number — 1 through 16 (inputs 9-16 are Aux outputs)
=
EXP Output Number — 1 through 16
X4%
=
Name — Invalid characters = ~ , @ = ' [ ] { } < > ` " : ; | and ?
X4^
=
X4& Audio File Name — Valid characters are A-Z, a-z, 0-9, _.
=
X4* Player ID — 1 through 8
=
X4( Repeat Status — 0 = Play once
=
X5) Play State — 0 = Stopped
=
X5! Macro Number — 1 through 64. Response will be padded with a leading
=
X5@ Macro Status — 0 = Macro idle
=
X5# Macro Name — 24 characters maximum (A-Z, a-z, 0-9, _)
=
X5$ Network Interface Card # — 1 = LAN 1
=
X5% Target OID — See
=
X5^ SNMP Access — 0 = Disabled (default)
=
X5& Ethernet Port Number — 0 = Off, custom port numbers must be 1024 or higher
=
SIS Command — SIS command to be sent to remote Dante-controlled device.
X5*
=
X5( SIS Command Response — Response from remote Dante-controlled device, tagged by DMP.
=
Gain Value — Levels use a 10x multiplier system with no decimal places. For example, a level of +10.4 dB
X6)
=
would be entered as 104 and a level of -3.2 dB would be entered as -32.
X6! Phantom power — 0 = Disabled
=
X6@ Mute Status — 0 = Unmute
=
X6# Group Master Group Number — 1 through 64
=
is not specified, monitoring defaults to the input with the corresponding I/O channel number.
is not specified, muting matches the group with the corresponding I/O channel number.
is not specified, the macro number defaults to the corresponding I/O channel number.
is not provided, the preset number defaults to the corresponding I/O channel number.
is not specified, the input number defaults to the corresponding I/O channel number.
is not specified, the input number defaults to the corresponding I/O channel number.
1 = Playing
Object ID (OID) Number Tables
1 = Mute
1 = Repeat
1-32 = Macro step
2 = LAN 2
on page 58.
1 = Enabled
1 = Enabled
DMP 128 Plus • SIS Configuration and Control
.
0
38