Internal Web Pages; Accessing The Embedded Web Pages - Extron electronics DMP 128 Plus User Manual

Internal Web Pages

The DMP 128 Plus features an internal web server, displayed as a web page. Two web pages are available: one
for general configuration and one for VoIP configuration (V-models only).
The pages allows you to monitor and adjust certain settings of the DMP 128 Plus via LAN connection. Use a web
browser to view the pages on a PC or control system connected to the device rear panel LAN port (non-V-models)
or LAN/VoIP port (V-models only).
This section gives an overview of the internal web pages, which are always available and cannnot be erased or
overwritten. Topics include:
•

Accessing the Embedded Web Pages

• DMP 128 Plus Default Web Page
•
DMP 128 Plus VoIP Web Page
Accessing the Embedded Web Pages
To access the internal web pages:
1. Connect the DMP Plus to a LAN using the rear panel LAN port.
2. On the connected PC, open a web browser.
3. Enter the IP address of the DMP Plus in the browser Address field.
For the VoIP web page: Enter the IP address followed by /www/voip.html.
NOTE: If the local system administrators have not changed the IP address, and the device has not been
assigned an IP address via DHCP, the default address (LAN for non-V-models, LAN 1 for V-models) is
192.168.254.254.
4. Press the <Enter> key on the keyboard.
5. Enter user or admin in the Username field and the password (if one exists) in the Password field when
prompted.
NOTE: The factory configured passwords for all accounts on this device have been set to the device serial
number. In the event of the complete system reset, the password reverts to the default, which is no
password.
6. Click Sign In.
DMP 128 Plus • Internal Web Page 70