DMP Plus Series C V / C V AT – Patton POTS
3.3 Line Registration
Click on the Line 1 tab to be configured as part of the system.
1) User Name:
2) Authentication Name:
3) Authentication Password:
4) Display Name: Optional. Specify an identifier for the line if required.
5) Primary Proxy Name/IP:
a. IP address of the Patton POTS interface
6) Primary Proxy Port:
7) Once the above settings have been entered, click the Apply button to save to the
device.
8) Click the Register button
a.
The DMP Plus will always show the Patton as "Not Registered"
1001
1001
1001
192.168.1.253
5060
Note: the VoIP Line will not register to the Patton POTS interface
Revision Date:
10/16/2020
Page 17 of 28