6.
7.
Resetting the Device from the Control Panel
To reset the Quantum Ultra unit (see figure 56):
1.
Figure 56.
When finished, click Confirm (see figure 54,
window opens, notifying you that the unit will restart in 5 seconds.
Figure 55.
Restart Message Window
Click OK on the prompt to close it. The unit restarts, applying your new settings.
Click the Reset Device button on the Control Panel (see figure 41,
page 42).
Reset Device Window
Quantum Ultra Videowall Processing System • Operation
, on the previous page). A message
5
5
, on
51