Table of Contents
Advertisement
130 / Viewing your messages
Replying to a message using an analog telephone
On an analog telephone connected to an Analog Station
Module or an analog telephone adaptor (ATA):
•
Press
The system automatically retrieves and connects the user
to the oldest message sender. (The message can originate
from either the designated direct-dial telephone or the
internal voice mail system.)
If the analog telephone has the Message Reply Enhancement
feature set to Yes, and the sender is the designated direct-dial
telephone, the message waiting indicator is turned off
automatically after the reply call is answered, no matter from
where the call is answered.
For analog telephones connected to an ASM, using the
Message Waiting Reply feature (
retrieves only internal messages sent to the user.
Analog telephones connected to an ASM cannot retrieve
external messages by using the Message Waiting Reply
feature (
must call back the external voice mail center to retrieve their
messages. When doing so, the message waiting indicator on
the analog telephone is turned off automatically.
Tip -
designated direct-dial telephone can send messages to an
analog telephone connected to an Analog Station Module
(ASM) using
invoke a single digit access code to reach the designated
direct-dial telephone and retrieve messages.
Modular ICS 7.1 System Coordinator Guide
.
). For external messages, users
If there is no voice mail system installed, only the
. The analog telephone can in turn
),
N0130946 01
Advertisement
Table of Contents
