Configuring An Isdn Telephone Dn Record - Nortel BCM50 Installation Manual

36

Configuring an ISDN telephone DN record

On each screen on the DNs list, add or modify settings to customize the telephone operations. The
following headings correspond to each screen.
Refer to the Programming notes in each section for configurations that are unique or specific for
ISDN telephones.
Table 8 ISDN device-specific DN record settings
Affected field
Name
Call forward
Line appearances
Answer DNs
Intercom keys
The following settings are the only capability settings that require specific configuration for ISDN devices.
Page settings
OLI as called number
All other settings are variable, based on your system requirements.
Programming BRI S-loops, lines and ISDN devices
Setting
Unique to each device or
device loop
Not supported.
Ring only
Ring only
two: not configurable
Page only (Y).
Devices cannot be assigned
to Page zones.
<checkbox>
Screen name and link to common procedures
"System DNs - Line Access tab" on page 483
"Line Assignment and Line Pools" on page 486
"Configuring Capabilities & Preferences" on page 487
"Configuring telephone capabilities" on page 489
If Enabled, the specified OLI for the telephone is used for
CLID for calls.