Table of Contents
Advertisement
User Preferences
The User Preferences section of programming allows you to
program memory buttons, speed dial codes and other settings
for any system digital telephone.
For example, an employee may want to have the Do Not
Disturb feature programmed onto a memory button or create a
speed dial code. Instead of programming from the each
specific set, you can go into programming on the telephone
nearest you to make the change.
Using User Preferences
1. Press
2. Enter the Basic password (the default passwords is
password to change User preferences.
By using a Basic password, it is possible to have someone else
do day-to-day upkeep of the telephone programming without
giving out access to sensitive programming. See Using
passwords on page 217.
After you enter the proper password, the display shows you the
telephone with the lowest internal number followed by its
name (For example,
1. Press
system.
2. Press
change. The display reads the model number of the
telephone at the extension.
N0130946 01
(
). (Note: You can also use the Coordinator
).
to move through all the telephones on the
when you see the telephone you want to
Modular ICS 7.1 System Coordinator Guide
).
Advertisement
Table of Contents
