Table of Contents
Advertisement
68 / Using handsfree and mute
Making calls without lifting the receiver
1. Press the handsfree button. If you do not have a prime line
assigned to your telephone, press a line button.
The internal microphone and speaker of the set are
automatically turned on.
Note: The 7316E digital phone has a handsfree button located
below the dialpad. This button only works if the
telephone is wired to a system running version 6.1 or
newer software, and
2. Dial your call.
3. Speak normally.
Muting the set
1. Press the mute button to switch off the telephone
microphone so that you can speak privately to someone in
your office while you are on a handsfree call.
2. Press the mute button to turn the microphone back on again
and continue your call.
Note: The 7208, 7316 and 7316E digital phones have a mute
button located below the dialpad. Other telephones
have mute programmed as a handsfree/mute
combination on the bottom memory button (right,
column on telephones that have two rows of memory
buttons). Refer to the user card for the telephones for
specifics about using this button.
The 7000 and 7100 digital phones do not have mute
buttons.
The Digital Mobility phone has a mute feature that is
controlled by the handset firmware.
Modular ICS 7.1 System Coordinator Guide
is set to
.
N0130946 01
Advertisement
Table of Contents
