188 / Programming the alarm feature
19. Press
20. Press
Using the Administration set to control alarms
Only a Hospitality Services set can use this alarm
administration feature. This feature is also associated with a
room number, and cannot be used on common sets.
Use this feature to:
•
query a current or last alarm time set for a room
•
assign an alarm time for any room
•
change an alarm time for any room
•
cancel an pending alarm for any room
To program the alarm, follow these steps:
1. Press
2. Enter the Desk admin password if you are prompted for a
password.
The set displays:
3. Enter the room number.
4. Press
If the alarm time is correct, press the
If you want to change the time, enter a new four-digit
alarm time.
If the clock uses a 24-hour format, enter an hour between
00 and 23, and minutes between 00 and 59. The set
displays:
If the clock uses a 12-hour format, enter the time, then
when the set displays:
The set displays:
Modular ICS 7.1 System Coordinator Guide
to choose either (yes) or (no).
to exit or
. The set displays
to continue programming.
:
, press
.
.
display key.
or
.
N0130946 01