Nortel ICS 7.1 Coordinator Manual page 107

The highest call number, which is made up of the Call Park
prefix followed by 25, is used only by 7000 and 7100 digital
phones, analog telephones, or devices connected to the system
using an analog terminal adapter (ATA) or an Analog Station
Module (ASM) and Digital Mobility phones.
Your installer or customer service representative programs
both the Call Park prefix and the delay before parked calls are
returned to the originating telephone. External calls parked for
longer than the programmed delay are returned to your
telephone.
Tip -
manner as other calls. For more information about Hunt
Groups, see Programming Hunt Groups on page 165.
Call Park can be disabled by your installer or customer service
representative.
Displays
N0130946 01
Answered Hunt Group calls are parked in the same
The person you were talking to has already
parked your call. You cannot park the same
call.
You have attempted to use Call Park with no
active call on your telephone. If the call you
want to park is on hold, reconnect to it before
you park it.
You have entered an invalid retrieval code.
There was no call on the retrieval code you
entered.
You have tried to park a conference call. Split
the conference and park the calls separately.
The person who retrieves the calls can
reconnect the conference.
Parking a call / 107
Modular ICS 7.1 System Coordinator Guide