Table of Contents
Advertisement
Using the Hospitality features
This section describes the Hospitality Services feature which
is used to administer room and alarm services in small to
medium-sized facilities such as hotels, motels, or hospitals.
There are three types of sets that make up this type of system:
Common set—this telephone can be found in the lobby,
office, or common area, and is not associated with a room.
This type of telephone is used for public access, and cannot
access the admin or room features.
Room set—this telephone resides in a specific room and can
be used by both guests and cleaning staff to set alarms or to
indicate room condition. Up to five DNs can be assigned to the
same room number, such as for fax lines, internet dial-up, etc.
Administration set—this telephone must be a two-line
display telephone, and is usually configured with a password
to allow secure administration of room occupancy and
condition services and alarm services.
Hospitality passwords
There are two passwords within the hospitality feature. One
provides secure access to the administration set, and one
provides secure access to a room condition setting from each
room set for housekeeping staff.
N0130946 01
Modular ICS 7.1 System Coordinator Guide
Advertisement
Table of Contents
