Table of Contents
Advertisement
Making a call using Call Log
You may find it helpful to place calls from within your Call
Log. The number stored for each call may vary, depending on
the type of call. For example, if the call was placed from a
Centrex or PBX system, the first few numbers may need to be
trimmed before you can make the call. If the number you want
to call is long distance, or if you want to use a line pool, you
may need to add numbers.
To place a call from a call log:
1. Display the log item for the call you want to place.
2. Display the associated telephone number.
3. Press
want to remove.
4. Dial any extra digits required.
5. Press an external line or line pool button.
6. Lift the receiver. (This is not necessary if handsfree is
programmed at your telephone.) The displayed number is
dialed.
Creating a password to your Call Log
To access your Call Log through a password:
1. Press
2. Enter your four-digit password.
The display reads
3. Re-enter your four-digit password. The display reads
has been assigned.
N0130946 01
or
once for every digit that you
. The displays reads
.
, which confirms that your password
Modular ICS 7.1 System Coordinator Guide
Using Call Log / 141
.
Advertisement
Table of Contents
