Nortel ICS 7.1 Coordinator Manual page 177

3. Enter the DN of the hunt group telephone you want to
monitor and press
If that telephone is currently on a Hunt group call, you will
be automatically connected to the call. If the telephone is
idle or not on a hunt group call, you will be prompted to
pick another DN to monitor.
To end a session: Press
or
While attempting to monitor a call, or during a call, you may
get one of the following prompts:
N0130946 01
.
Tips -
Your telephone is muted by default at the
beginning of any monitoring session. Press the mute
button or the display key under
conversation.
, or press the display key under
.
Enter the DN for the Hunt Group
telephone that you want to monitor. If you
make a mistake entering a DN number,
press
the number you entered is correct, press
.
The system redisplays this prompt if it is
unable to establish a session with the
telephone DN that you enter.
While a call is being monitored, you can
choose to:
• move to another Hunt group member
(
• join the current conversation (
• exit the silent monitoring (
Using Silent Monitor / 177
to enter the
and re-enter the number. If
)
Modular ICS 7.1 System Coordinator Guide
)
)