Programming The Queue Time-Out; Programming The Overflow Set - Nortel ICS 7.1 Coordinator Manual

Programming the queue time-out

This setting allows you to program the number of seconds a
call remains in the Hunt Group queue before it is routed to the
overflow position.
1. At
2. Enter the Hunt Group number you want to program (1-30)
or press
3. Press
4. Press
5. Press
6. Press

Programming the overflow set

This setting allows you to program the overflow telephone to
which the Hunt Group calls are to be routed. Unless the
overflow position is a Hunt Group telephone, the call ceases to
be a Hunt Group call. If the overflow telephone is a Hunt
Group telephone, the call is treated as a new call and goes to
the bottom of the queue.
The overflow telephone can be a DN number associated with
a voice mailbox.
1. At
2. Enter the Hunt Group number you want to program (1-30)
or press
N0130946 01
Programming the queue time-out / 173
, press
.
to scroll through the groups.
. The display shows
until the display shows
to set the queue time-out:
.
to exit or
, press
.
to scroll through the groups.
. The display shows
to continue programming.
. The display shows
Modular ICS 7.1 System Coordinator Guide
.
.