Table of Contents
Advertisement
System coordinator password: A
one- to six-digit password that prevents
unauthorized access to programming.
The System coordinator password can
be assigned and changed in Passwords
programming.
System coordinator plus: A
system coordinator who also performs
technical and maintenance functions for
the Norstar system.
System coordinator plus
password: A one- to six-digit
password that prevents unauthorized
access to programming. The System
coordinator plus password can be
assigned and changed in Passwords
programming.
System coordinator
programming: The programming
settings that are most commonly
changed once the Norstar system is
installed.
Press
then
coordinator programming.
system data: An option in the Set
Copy function. System Data refers to
the programmable system settings that
apply to all telephones and lines.
System programming: A
programming section that allows you to
assign and maintain certain settings on
the Norstar system. System
programming is performed by an
installer or system coordinator plus.
System speed dial code: A three-
digit code (001 to 255) that can be
programmed to dial a telephone number
up to 24 digits long. System speed dial
codes are programmed for the entire
Norstar system under the System Speed
programming heading.
System ID: The System ID (or System
Security number) can be accessed on
any programming telephone display by
N0130946 01
,
to access System
pressing
System-wide Call Appearance
(SWCA) keys
These 16 feature
codes can be assigned to buttons with
indicators on a group of telephones to
provide call appearance for incoming
calls that can be answered by any
telephone in the group. At the same
time, the indicator displays the current
status of the call.
T
Target lines: Lines used to answer
incoming calls only. A target line routes
a call according to digits it receives from
an incoming trunk. They are referred to
by line numbers in the same way as
physical lines.
Telco features: A programming
section that allows you to specify the
external telephone numbers that are
dialed by the Message feature to retrieve
voice messages, or to set up CLASS
(CMS) services for lines and sets. Telco
features are accessed by an installer or a
system coordinator plus.
Terminal equipment (TE): A
generic term for devices that connect to
an ISDN network. Examples of ISDN
TE are ISDN telephones, computers
equipped with ISDN cards and video
terminals.
Terminals and Sets: A
programming section that allows you to
assign and change settings that apply to
the telephones and other devices
connected to the Norstar system.
Terminals and Sets programming is
performed by an installer or a system
coordinator.
Modular ICS 7.1 System Coordinator Guide
Glossary / 267
, or
.
to
Advertisement
Table of Contents
