Disconnecting One Party - Nortel ICS 7.1 Coordinator Manual

62 / Creating a Conference Call
3. Press the button where the first call is on hold to create a
conference.
Only the person who established the conference can process
the conference by using the procedures described in this
section.
Tip -
call. See Turning Privacy on or off for a call on page 72.

Disconnecting one party

You can disconnect one party from a conference and continue
talking to the other.
You can activate this feature on all system digital phones
except for 7000 or 7100 digital phones and Digital Mobility
phones.
1. Press the line button of the call that you want to disconnect.
The call that you want to keep is automatically put on hold.
2. Press
3. Press the line button of the held call to speak to the
remaining person.
On a 7000 or 7100 digital phone or a Digital Mobility phone:
1. Press
Press
hold.
2. Press
3. Press
Modular ICS 7.1 System Coordinator Guide
You can create a conference by releasing privacy on a
. The call is disconnected.
, to place one caller on hold.
again, to put the caller you want to keep on
. The call is disconnected.
to speak to the remaining party.
N0130946 01