Tones - Nortel ICS 7.1 Coordinator Manual

234 / Tones

Remote access is possible only on lines that your installer or
customer service representative programs to auto-answer
calls.
To use features on a remote Norstar system, press
by the feature code. Even if you are calling from a Norstar
system, such as within a private network, press
.
In certain situations, you may experience lower volume levels
when using Norstar remotely.
Tones
You may hear some of the following tones while accessing
Norstar remotely.
Tone
Busy tone
Norstar system dial
tone
Fast busy tone
Stuttered dial tone
Modular ICS 7.1 System Coordinator Guide
What it means
Dialed a busy line pool access code. You hear
system dial tone again after five seconds.
You may use the Norstar remotely.
You have done one of the following
• Entered an incorrect COS password. Your
call is disconnected after five seconds.
• Taken too long while entering a COS
password. Your call is disconnected after
five seconds.
• Tried to use a line pool or feature not
permitted by your Class of Service. You
hear system dial tone again after five
seconds.
• Dialed a number in the Norstar system
which does not exist. Your call is
disconnected after five seconds.
Enter your COS password.
followed
instead of
N0130946 01