Table of Contents
Advertisement
222 / Using special telephones
5. Enter the internal number of the telephone you want to
program and press
6. Press
7. Press
8. Press
.
Any number of telephones can be assigned to call the
direct-dial telephone.
Tip -
telephone to ring can be programmed by your installer or
customer service representative.
The Norstar system cannot verify that the number you assign as
an external direct-dial telephone is valid. Check the number
before assigning it as a direct-dial telephone, and call the
direct-dial telephone after you've assigned it in order to test it.
Hotline
A hotline telephone calls a preset internal or external
telephone number when you pick up the receiver (or press the
handsfree button).
Tip -
Hotline is active.
Bypassing a Hotline
Press a line button, or use the Pre-Dial or the Automatic Dial
feature before you pick up the receiver or press the handsfree
button on a hotline telephone. See the Telephone Feature Card
or see Changing how you dial your calls on page 80.
Modular ICS 7.1 System Coordinator Guide
.
.
until the display reads
to select
The digit you dial in order to get the direct-dial
Label the telephone to inform anyone using it that
. The display reads
.
or
N0130946 01
Advertisement
Table of Contents
