Changing A Telephone Pickup Group - Nortel ICS 7.1 Coordinator Manual

58 / Picking up a call ringing at another telephone

Changing a telephone pickup group

Telephones can be put into and taken out of pickup groups.
1. Place the programming overlay over the appropriate
buttons on your two-line-display telephone.
2. Press
3. Press
password).
4. Press
telephone you want to program.
5. Press
6. Press
7. Press
pickup group (1-9) or remove it from a pickup group
( .
Displays
Modular ICS 7.1 System Coordinator Guide
(the default System Coordinator
and enter the internal number of the
twice.
five times.
at : to assign the telephone to
You are already connected to the telephone
that made the call you are trying to pick up.
This can happen if you are on a call to a
co-worker and your co-worker dials the
number of a telephone in your pickup group,
and you attempt to pick up that call.
There is no call that you can pick up or the
ringing call was answered.
You have tried to pick up a call on someone
else's private line.
Enter the internal number of the telephone
that is ringing. (You may use an internal
autodial button to do this.)
If you decide not to answer a ringing call after
activating Directed Pickup, press
.
.
N0130946 01