Table of Contents
Advertisement
Allowing/disallowing an auxiliary ringer
This setting allows you to allow/disallow an external ringer to
sound when a call comes in for a specific hunt group. If you
allow this service, you must have an auxiliary ringer properly
installed on your system. Refer to Using an auxiliary ringer on
page 226.
1. At
2. Enter the Hunt Group number you want to program (1-30)
or press
3. Press
4. Press
5. Press
(No) to disallow an auxiliary ringer.
6. Press
Assigning a distinctive ring pattern to a
Hunt Group
You can assign distinctive ring patterns to your Hunt Group so
that calls can be rated in priority for the group. These
distinctive ring patterns have the same characteristics as for
line and extension distinctive ring patterns.
Note: Digital Mobility phones that are members of hunt
groups do not reflect this feature.
The Hunt Group distinctive ring pattern determines how a call
will ring within the Hunt Group. If members of the group have
ring patterns assigned to their telephones that are higher than
the ring patterns of the incoming line or the Hunt Group, then
N0130946 01
Allowing/disallowing an auxiliary ringer / 175
, press
.
to scroll through the groups.
. The display shows
until the display shows
to choose (yes) to turn the ringer on or
to exit or
. The display shows
to continue programming.
Modular ICS 7.1 System Coordinator Guide
.
.
Advertisement
Table of Contents
