Table of Contents
Advertisement
Turning on Line Redirection
Follow these steps to turn on Line Redirection:
1. Press
2. Select the outgoing line to be used for redirected calls.
3. Enter the number to which calls are redirected.
Refer to the list below for suggestions.
4. Select the lines to be redirected.
In step 3, you can enter the telephone number to which you
want to redirect calls, using one of the following methods:
•
Press an external autodial button.
•
Enter an external telephone number (using no more than
24 digits) then press
•
Press
outgoing line is a private network line that does not require
you to dial digits.
If you use
wait until all the lines on your telephone light up before
pressing
light up, those lines not lit are not redirected.
Tip -
used normally when it is not busy on a redirected call. To avoid
redirection failing because the chosen line is in use, choose a
line pool with several lines in it.
N0130946 01
.
or
or
if the line you have chosen as the
to redirect all your lines, it is important that you
or
If you press
The line chosen for redirecting calls on other lines can be
Line Redirection / 117
.
or
before all the lines
Modular ICS 7.1 System Coordinator Guide
Advertisement
Table of Contents
