Setting The Hunt Delay - Nortel ICS 7.1 Coordinator Manual

If a Hunt Group has available members but nobody answers
the call, the call is rerouted through the list until someone
answers the call. If all lines are busy, the call is routed
according to whatever has been set for the busy line setting.
Refer to 'Programming busy line setting' on page 172.
1. At
2. Enter the Hunt Group number you want to program (1-30)
or press
3. Press
4. Press
5. Press
.
6. Press

Setting the hunt delay

This setting allows you to program the number of rings the
system permits at a Hunt Group telephone before moving on
to the next telephone in the Hunt Group.
1. At
2. Enter the Hunt Group number you want to program (1-30)
or press
3. Press
4. Press
5. Press
.
6. Press
N0130946 01
, press
.
to scroll through the groups.
. The display shows
until the display shows
to set the mode:
to exit or
, press
.
to scroll through the groups.
. The display shows
until the display shows
to select the setting:
to exit or
Setting the hunt delay / 171
. The display shows
.
,
to continue programming.
. The display shows
to continue programming.
Modular ICS 7.1 System Coordinator Guide
.
,
.
.