Making A Telephone A Hotline Telephone - Nortel ICS 7.1 Coordinator Manual

Making a telephone a hotline telephone

You can set up a telephone as a hotline.
Tip -
telephone. For more information about Hunt Groups, see
Programming Hunt Groups on page 165.
1. Place the programming template over the appropriate
buttons of the programming telephone.
2. Press
3. Press
password).
4. Press
5. Enter the internal number of the telephone.
6. Press
7. Press
8. Press
9. Press
• Internl assigns an internal number.
• External assigns an external number.
If you select an external number, you can select the line on
which the call is made:
• the prime line
• an external line
• a line in a line pool, and a line pool access code
For this type of line, you must specify the line pool
access code.
N0130946 01
A Hunt Group set DN can be specified as a Hotline
(the default System Coordinator
at
. The display reads
.
until the display reads
to select the type of call the hotline makes:
, or .
Using special telephones / 223
.
.
Modular ICS 7.1 System Coordinator Guide
.
.