Table of Contents
Advertisement
152 / Default button assignments
Also note that the current incoming call on this telephone
defaults to the voice path last used. For example, if you
answered the previous call using your headset, the next call
will come in over your headset.
7316 digital phone button defaults
The default button assignments for the 7316 digital phone
depend on the template applied.
Note the button numbering for some of buttons of this
telephone are not consecutive. This is because the buttons are
mapped to a legacy telephone that had a second level of
memory buttons on the top pad. However, since there is no
second level to the memory buttons on the 7316, the button
numbers only reflect the lower level. In Button programming,
however, the absent button numbers appear, but they are not
valid programming for this telephone.
Modular ICS 7.1 System Coordinator Guide
Upgrade programming note:
The 7316E digital phone uses 7316 programming
when connected to systems running software
prior to MICS 6.1. When those systems are
upgraded to MICS 6.1 or newer software, the
telephone converts to 7316E programming,
which means that all assigned memory buttons
are erased. As well, the line assignments,
Answer DN assignments, and intercom buttons
change to the 7316E default positions. Refer to
the default assignments for both telephones.
N0130946 01
Advertisement
Table of Contents
