Network; Scanner Name - Ricoh fi-8040 Operator's Manual

Network

Scanner Name

Set a scanner name.
Click [Scanner Name] under [Network] to display the window.
Scanner Name
Enter a scanner name within 64 characters.
The following characters can be used for a scanner name:
● Alphanumerical characters
● Space
The space before or after the character string is ignored.
● Symbols
-_
The factory default setting is [fi-8040-<ScannerSerialNumber>].
[Apply to the scanner] button
Applies the configured settings.
HINT
● The scanner serial number can be checked on the product label.
For the product label, refer to
● When [Dynamic DNS] is enabled, enter a scanner name within 63 characters.
For details about Dynamic DNS, refer to
It is also recommended that you do not use the following characters for the scanner name as
they are replaced with "-" when the name is registered in the DNS servers.
- Underscore "_"
- Space
● The scanner name can be checked in the screen that appears via the following procedure:
→
Checking the Product Label (page
Wired LAN (page
on the touch screen
367
Network Settings (fi Series Network Settings)
250).
369).