Ricoh fi-8040 Operator's Manual page 318

The [Offset] window appears.
Items that can be configured in these windows are as follows:
Setting Item
Count
(Checking/Clearing)
Power saving
Offset Setting
Vertical magnification Adjustment
Scanner Settings (Software Operation Panel)
Description
The status of each consumable part can be viewed to
determine when to replace or clean the consumables.
When you have replaced or cleaned a consumable part,
clear the corresponding counter.
Specify the waiting time before the scanner enters
power saving mode.
Specify a starting position for scanning.
Specify the magnification level for the feed direction.
318