Ricoh fi-8040 Operator's Manual page 133

Load the document face-down in the ADF paper chute (feeder).
For details, refer to How to Load Documents (page
3
Press the [Save to a folder] button on the touch screen.
4
In the [Select Save Destination] screen, press a save destination.
HINT
● When adding, changing, or deleting save destinations, refer to
Save Destination for Images (page
● If no save destination is specified, the screen to confirm whether to add a save destination is
displayed. Press the [Yes] button to add a save destination.
● When you use a CA certificate or encryption key for communication with the save
destination, set it in fi Series Network Settings.
For details, refer to
5
In the [Scan Settings] screen, change the settings as needed and press the [OK] button.
To configure the scan settings in detail, press the [Advanced settings] button.
For details about the scan settings, refer to
6
In the [Ready to scan] screen, press the [Scan] button.
Scanning starts.
HINT
When [Continue scanning] is enabled in the scan settings, the [Scan] button appears on the
[Ready to scan] screen after scanning is complete.
To continue scanning documents, load the documents in the ADF paper chute (feeder) and
press the [Scan] button.
7
When the [Complete Scan] button appears after scanning, press the button.
138).
Network Settings (fi Series Network Settings) (page
Scan Settings (page
133
Various Ways to Scan (DirectScan)
88).
Adding/Changing/Deleting a
359).
260).