Add Save Destination/Change Save Destination - Ricoh fi-8040 Operator's Manual

Add Save Destination/Change Save Destination

Set save destinations (folders on the network) to which scanned images will be saved when using
DirectScan.
Up to 25 save destinations can be added.
Display Name
Set a name for the save destination.
Enter a display name within 48 characters.
You cannot set the same name as a display name that is already registered.
The space before or after the character string is ignored.
Destination Type
Set the type of the save destination.
● Network Directory
This is the factory default setting.
When [Network Directory] is selected, specify the following items:
- Host Name/IP address
The host name, FQDN, or IP address can be set for this item.
The space before or after the character string is ignored.
When a path delimiter appears at the beginning of the value, the delimiter will be removed.
ATTENTION
Note that an IPv6 address is not supported.
HINT
When entering a host name, the DNS servers need to be set on the scanner.
- Save Destination Path
The spaces before and after the character string and "/" prefix are ignored.
" " will be replaced with "/". When the first character is " ", the character will be replaced
with "/" and the leading "/" will be deleted.
- Username
Set the user name used to connect to the save destination.
You can also set the name in the "UserName@Domain" or "Domain UserName" format.
The space before or after the character string is ignored.
- Password
Enter the password for the user name used for connecting to the save destination.
Spaces before and after the character string are maintained.
● FTP
When [FTP] is set, specify the following items:
DirectScan Settings (Destination/Job/Scan Settings) (Touch Screen)
253