Replacing The Roller Set S - Ricoh fi-8040 Operator's Manual

Replacing the Roller Set S

The Roller Set S consists of the brake roller and the pick roller.
Replace the Roller Set S in following procedure.
1
Turn off the scanner, unplug the power cable and wait for at least 15 minutes.
For details, refer to
2
Remove all documents from the ADF paper chute (feeder).
3
Open the ADF.
For details, refer to
CAUTION
4
Replace the brake roller.
a
Open the brake roller cover.
Hold both ends of the cover, and open it in the direction of the arrow.
b
Remove the brake roller.
How to Turn the Power OFF (page
How to Open the ADF (page
When the ADF is open, it might close accidentally. Be careful not to get
your fingers caught.
168
62).
65).
Replacing the Consumables