Scanning Photographs And Clippings Without Damaging Them - Ricoh fi-8040 Operator's Manual

Scanning Photographs and Clippings without Damaging Them

Using the optional Carrier Sheet allows you to scan non-standard size documents such as photographs
or clippings without damaging them.
1
Place the document inside the Carrier Sheet.
Open the Carrier Sheet and place the document against the top center of the Carrier Sheet.
2
Load the Carrier Sheet with the end with the black and white pattern as the leading edge and
with the scanning side facing the ADF paper chute (feeder) (face-down).
Secure the Carrier Sheet with the side guides to avoid skewing.
3
Configure the scan settings in the scanner driver to use the Carrier Sheet.
For details, refer to the help for the scanner driver.
4
Scan the document with the image scanning application.
For details, refer to the manual/help of the image scanning application.
ATTENTION
● The image is output at the center of the page in the size specified for [Paper Size] in the scanner
driver.
119
Various Ways to Scan